Customizable experience from TS: Ms Virtual Earth 6.0, Application Development test engine

Most IT candidates prefer to choose TS: Ms Virtual Earth 6.0, Application Development test engine rather than the pdf format dumps. After all, the pdf dumps have some limits for the people who want to study with high efficiency. 070-544 TS: Ms Virtual Earth 6.0, Application Development test engine is an exam test simulator with customizable criteria. The questions are occurred randomly which can test your strain capacity. Besides, score comparison and improvement check is available by TS: Ms Virtual Earth 6.0, Application Development test engine, that is to say, you will get score and after each test, then you can do the next study plan according to your weakness and strengths. Moreover, the TS: Ms Virtual Earth 6.0, Application Development test engine is very intelligent, allowing you to set the probability of occurrence of the wrong questions. Thus, you can do repetition training for the questions which is easy to be made mistakes. While the interface of the test can be set by yourself, so you can change it as you like, thus your test looks like no longer dull but interesting. In addition, the MCTS TS: Ms Virtual Earth 6.0, Application Development test engine can be installed at every electronic device without any installation limit. You can install it on your phone, doing the simulate test during your spare time, such as on the subway, waiting for the bus, etc. Finally, I want to declare the safety of the TS: Ms Virtual Earth 6.0, Application Development test engine. TS: Ms Virtual Earth 6.0, Application Development test engine is tested and verified malware-free software, which you can rely on to download and installation.

Bearable cost

We have to admit that the TS: Ms Virtual Earth 6.0, Application Development exam certification is difficult to get, while the exam fees is very expensive. So, some people want to prepare the test just by their own study and with the help of some free resource. They do not want to spend more money on any extra study material. But the exam time is coming, you may not prepare well. Here, I think it is a good choice to pass the exam at the first time with help of the TS: Ms Virtual Earth 6.0, Application Development actual questions & answer rather than to take the test twice and spend more money, because the money spent on the TS: Ms Virtual Earth 6.0, Application Development exam dumps must be less than the actual exam fees. Besides, we have the money back guarantee that you will get the full refund if you fail the exam. Actually, you have no risk and no loss. Actually, the price of our Microsoft TS: Ms Virtual Earth 6.0, Application Development exam study guide is very reasonable and affordable which you can bear. In addition, we provide one year free update for you after payment. You don't spend extra money for the latest version. What a good thing.

At last, I want to say that our MCTS TS: Ms Virtual Earth 6.0, Application Development actual test is the best choice for your 100% success.

Microsoft 070-544 braindumps Instant Download: Our system will send you the 070-544 braindumps file you purchase in mailbox in a minute after payment. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

Because of the demand for people with the qualified skills about Microsoft TS: Ms Virtual Earth 6.0, Application Development certification and the relatively small supply, TS: Ms Virtual Earth 6.0, Application Development exam certification becomes the highest-paying certification on the list this year. While, it is a tough certification for passing, so most of IT candidates feel headache and do not know how to do with preparation. In fact, most people are ordinary person and hard workers. The only way for getting more fortune and living a better life is to work hard and grasp every chance as far as possible. Gaining the 070-544 TS: Ms Virtual Earth 6.0, Application Development exam certification may be one of their drams, which may make a big difference on their life. As a responsible IT exam provider, our TS: Ms Virtual Earth 6.0, Application Development exam prep training will solve your problem and bring you illumination.

Microsoft TS: Ms Virtual Earth 6.0, Application Development Sample Questions:

1. You are creating a Web application by using the Virtual Earth 6.0 map control.
A Web page of the application provides links to a number of pre-defined locations. The application must meet the following requirements:
The links can be shared.
The links are encoded with map properties.
Users can copy the links to the Windows clipboard.
You need to write code to meet the requirements.
Which code fragment should you use?

A) <code id="Link"
onclick="window.open(location.protocol+location.pathname+'?40.689167&-
7 4.04472&16&h');"> Liberty </code>
B) <button id="Link" onclick="location.replace(' http:
//www.mymappingsite.com/mymappage.aspx?40.689167&-74.04472&16&h');"> Liberty
< /button>
C) <address id="Link"
onclick="location.replace(location.protocol+location.pathname+'?40.689167&-
74.04472&16&h');"> Liberty </address>
D) <a id="Link" href="http: //www.mymappingsite.com/mymappage.aspx?40.689167&-
74.04472&16&h">Liberty</a>

2. You are creating a Web application by using the Virtual Earth 6.0 map control in the
Microsoft Visual Studio environment. A Web page in the application is programmed by using the client-side JavaScript code. You insert break points at appropriate locations within the code. When you debug the application, you find that you are able to step into the server-side code. However, you are unable to step into the client-side JavaScript code.
You need to debug the client-side JavaScript code. What should you do?

A) In Microsoft Internet Explorer, clear the Disable Script Debugging (Internet Explorer) option in the Internet Options dialog box.
B) In the client-side JavaScript code, insert the Debugger command before each break point.
C) In Microsoft Internet Explorer, select the Enable Display a notification about every script error option in the Internet Options dialog box.
D) In Visual Studio, select the Attach to Process option from the Debug menu. Then attach the debugger to the Microsoft Internet Explorer process.

3. You are creating a browser-based Web application by using Virtual Earth 6.0 map control.
A Web page of the application has a map and a list of locations.
When a user selects a location from the list, the application must meet the following requirements:
A default view of the selected location is loaded.
The selected location is centered.
The selected location appears in the three-dimensional mode, at an oblique pitch, and heads due north.
You need to program Virtual Earth map control to ensure that the requirements are met.
Which code segment should you use?

A) var defView1= new VEMapViewSpecification(new VELatLong(40.68,-74.04), 16, 360,
4 5, 0); map.Loadmap(defView1); map.SetMapMode(VEMapMode.Mode3D);
B) var defView1= new VEMapViewSpecification(new VELatLongRectangle (40.88,-73.8,
4 0.48,-74.28), 16, 360, -45, 0); map.SetMapMode(VEMapMode.Mode3D);
map.SetMapMode(defView1);
C) var defView1= new VEMapViewSpecification(new VELatLongRectangle (40.88,-73.8,
40.48, -74.28), 16, 360, 45, 0); map.Loadmap(defView1);
map.SetMapMode(VEMapMode.Mode3D);
D) var defView1= new VEMapViewSpecification(new VELatLong(40.68,-74.04), 16, 360, -
4 5, 0); map.SetMapMode(VEMapMode.Mode3D); map.SetMapView(defView1);

4. You are creating a Web application by using the Virtual Earth 6.0 map control. A Web page of the application loads two map controls named Map1 and Map2. Map1 displays a navigable, primary map. Map2 is the secondary instance of Map1 and displays an overview of the primary map. You need to ensure that when the user navigates the primary map, the overview is automatically updated. Which code segment should you use?

A) Map2 = new VEMap('myMap'); Map2.LoadMap(); Map2.SetMapView(defView1);
Map2.AttachEvent("onresize", UpdateOverview);
B) Map1 = new VEMap('myMap'); Map1.LoadMap(); Map1.SetMapView(defView1);
Map1.AttachEvent("onchangeview", UpdateOverview);
C) Map2 = new VEMap('myMap'); Map2.LoadMap(); Map2.SetMapView(defView1);
Map2.AttachEvent("onchangeview", UpdateOverview);
D) Map1 = new VEMap('myMap'); Map1.LoadMap(); Map1.SetMapView(defView1);
Map1.AttachEvent("onresize", UpdateOverview);

5. The branch office locations of your company are saved and shared in a portal data store by using the Live Search Maps portal. The company wants to display the locations on a Virtual
Earth 6.0 map. You need to add the saved data as a new layer on the Virtual Earth map.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)

A) Extract the GUID from a Live Search Maps Collection reference.
B) Import the data as VECollection to a new layer.
C) Import the data as GeoRSS to a new layer.
D) Access the data by using the URL for the Live Search Maps Collection object.

Solutions: