Bearable cost

We have to admit that the TS: Accessing Data with Microsoft .NET Framework 4 exam certification is difficult to get, while the exam fees is very expensive. So, some people want to prepare the test just by their own study and with the help of some free resource. They do not want to spend more money on any extra study material. But the exam time is coming, you may not prepare well. Here, I think it is a good choice to pass the exam at the first time with help of the TS: Accessing Data with Microsoft .NET Framework 4 actual questions & answer rather than to take the test twice and spend more money, because the money spent on the TS: Accessing Data with Microsoft .NET Framework 4 exam dumps must be less than the actual exam fees. Besides, we have the money back guarantee that you will get the full refund if you fail the exam. Actually, you have no risk and no loss. Actually, the price of our Microsoft TS: Accessing Data with Microsoft .NET Framework 4 exam study guide is very reasonable and affordable which you can bear. In addition, we provide one year free update for you after payment. You don't spend extra money for the latest version. What a good thing.

At last, I want to say that our MCTS TS: Accessing Data with Microsoft .NET Framework 4 actual test is the best choice for your 100% success.

Microsoft 70-516 braindumps Instant Download: Our system will send you the 70-516 braindumps file you purchase in mailbox in a minute after payment. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

Because of the demand for people with the qualified skills about Microsoft TS: Accessing Data with Microsoft .NET Framework 4 certification and the relatively small supply, TS: Accessing Data with Microsoft .NET Framework 4 exam certification becomes the highest-paying certification on the list this year. While, it is a tough certification for passing, so most of IT candidates feel headache and do not know how to do with preparation. In fact, most people are ordinary person and hard workers. The only way for getting more fortune and living a better life is to work hard and grasp every chance as far as possible. Gaining the 70-516 TS: Accessing Data with Microsoft .NET Framework 4 exam certification may be one of their drams, which may make a big difference on their life. As a responsible IT exam provider, our TS: Accessing Data with Microsoft .NET Framework 4 exam prep training will solve your problem and bring you illumination.

Customizable experience from TS: Accessing Data with Microsoft .NET Framework 4 test engine

Most IT candidates prefer to choose TS: Accessing Data with Microsoft .NET Framework 4 test engine rather than the pdf format dumps. After all, the pdf dumps have some limits for the people who want to study with high efficiency. 70-516 TS: Accessing Data with Microsoft .NET Framework 4 test engine is an exam test simulator with customizable criteria. The questions are occurred randomly which can test your strain capacity. Besides, score comparison and improvement check is available by TS: Accessing Data with Microsoft .NET Framework 4 test engine, that is to say, you will get score and after each test, then you can do the next study plan according to your weakness and strengths. Moreover, the TS: Accessing Data with Microsoft .NET Framework 4 test engine is very intelligent, allowing you to set the probability of occurrence of the wrong questions. Thus, you can do repetition training for the questions which is easy to be made mistakes. While the interface of the test can be set by yourself, so you can change it as you like, thus your test looks like no longer dull but interesting. In addition, the MCTS TS: Accessing Data with Microsoft .NET Framework 4 test engine can be installed at every electronic device without any installation limit. You can install it on your phone, doing the simulate test during your spare time, such as on the subway, waiting for the bus, etc. Finally, I want to declare the safety of the TS: Accessing Data with Microsoft .NET Framework 4 test engine. TS: Accessing Data with Microsoft .NET Framework 4 test engine is tested and verified malware-free software, which you can rely on to download and installation.

Microsoft TS: Accessing Data with Microsoft .NET Framework 4 Sample Questions:

1. You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server database. You load records from the Customers table
into a DataSet object named dataset.
You need to retrieve the value of the City field from the first and last records in the Customers table.
Which code segment should you use?

A) DataTable dt = dataset.Tables["Customers"]; string first = dt.Rows[0]["City"].ToString(); string last = dt.Rows[dt.Rows.Count - 1]["City"].ToString();
B) DataRelation relationFirst = dataset.Relations[0]; DataRelation relationLast = dataset.Relations[dataset.Relations.Count - 1]; string first = relationFirst.childTable.Columns["City"].ToString(); string last = relationLast.childTable.Columns["City"].ToString();
C) DataRelation relationFirst = dataset.Relations[0]; DataRelation relationLast = dataset.Relations[dataset.Relations.Count]; string first = relationFirst.childTable.Columns["City"].ToString(); string last = relationLast.childTable.Columns["City"].ToString();
D) DataTable dt = dataset.Tables["Customers"]; string first = dt.Rows[0]["City"].ToString(); string last = dt.Rows[dt.Rows.Count]["City"].ToString();

2. You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to two different Microsoft SQL Server 2008 database servers named Server1 and
Server2.
A string named sql1 contains a connection string to Server1. A string named sql2 contains a connection
string to Server2.
01 using (TransactionScope scope = new
02 ...
03 )
04 {
05 using (SqlConnection cn1 = new SqlConnection(sql1))
06 {
07 try{
08 ...
09 }
10 catch (Exception ex)
11 {
12 }
13 }
14 scope.Complete();
15 }
You need to ensure that the application meets the following requirements:
-There is a SqlConnection named cn2 that uses sql2.
-The commands that use cn1 are initially enlisted as a lightweight transaction.
The cn2 SqlConnection is enlisted in the same TransactionScope only if commands executed by cn1 do not
throw an exception.
What should you do?

A) Insert the following code segment at line 02.
TransactionScope(TransactionScopeOption.Suppress)
Insert the following code segment at line 08.
using (SqlConnection cn2 = new SqlConnection(sql2))
{
try
{
cn2.Open();
...
cn1.Open();
...
}
catch (Exception ex){}
}
B) Insert the following code segment at line 02.
TransactionScope(TransactionScopeOption.RequiresNew)
Insert the following code segment at line 08.
using (SqlConnection cn2 = new SqlConnection(sql2)) {
try{
cn2.Open();
...
cn1.Open();
...
}
catch (Exception ex){}
}
C) Insert the following code segment at line 02.
TransactionScope(TransactionScopeOption.RequiresNew)
Insert the following code segment at line 08.
cn1.Open();
...
using (SqlConnection cn2 = new SqlConnection(sql2))
{
try
{
cn2.Open();
...
}
catch (Exception ex){}
}
D) Insert the following code segment at line 02.
TransactionScope(TransactionScopeOption.Suppress)
Insert the following code segment at line 08.
cn1.Open();
...
using (SqlConnection cn2 = new SqlConnection(sql2))
{
try
{
cn2.Open();
...
}
catch (Exception ex){}
}

3. You use Microsoft .NET Framework 4.0 to develop an application that connects to two separate Microsoft
SQL Server 2008 databases.
The Customers database stores all the customer information, and the Orders database stores all the order
information.
The application includes the following code. (Line numbers are included for reference only.)
01 try
02 {
03 conn.Open();
04 tran = conn.BeginTransaction("Order");
05 SqlCommand cmd = new SqlCommand();
06 cmd.Connection = conn;
07 cmd.Transaction = tran;
08 tran.Save("save1");
09 cmd.CommandText = "INSERT INTO [Cust].dbo.Customer " + "(Name,
PhoneNumber) VALUES ('Paul Jones', " + "'404-555-1212')";
10 cmd.ExecuteNonQuery();
11 tran.Save("save2");
12 cmd.CommandText = "INSERT INTO [Orders].dbo.Order " + "(CustomerID)
VALUES (1234)";
13 cmd.ExecuteNonQuery();
14 tran.Save("save3");
15 cmd.CommandText = "INSERT INTO [Orders].dbo." + "OrderDetail (OrderlD,
ProductNumber) VALUES" + "(5678, 'DC-6721')";
16 cmd.ExecuteNonQuery();
17 tran.Commit();
18 }
19 catch (Exception ex)
20 {
21 ...
22 }
You run the program, and a timeout expired error occurs at line 16. You need to ensure that the customer
information is saved in the database.
If an error occurs while the order is being saved, you must roll back all of the order information and save the
customer information.
Which line of code should you insert at line 21?

A) tran.Rollback();
B) tran.Rollback("save2"); tran.Commit();
C) tran.Rollback(); tran.Commit();
D) tran.Rollback("save2");

4. You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4 to develop an application. A file named books.xml contains the following XML.
<bib>
<book title="Programming in Unix" year="1992">
<author>Author1</author>
<author>Author2</author>
<author> Author 3 </author>
</book> </bib>
The application must generate an XML result that contains an XML element named BookTitle for each
book. The text content of the element must contain the title of the book.
You need to create a query that generates the new XML result. What should you do?

A) XDocument document = XDocument.Load("books.xml");
var query = from node in document.Descendants()
where node.Name.LocalName == "book"
select new XElement("BookTitle").Value = node.FirstAttribute.Value;
B) XDocument document = XDocument.Load("books.xml");
var query = from node in document.Descendants()
where node.Name.LocalName == "book"
select new XElement("BookTitle", node.FirstAttribute.Value);
C) XDocument document = XDocument.Load("books.xml");
var query = from node in document.DescendantNodes()
where node.ToString() == "book"
select new XElement("BookTitle", node.ToString());
D) XDocument document = XDocument.Load("books.xml");
var query = from node in document.DescendantNodes()
where node.ToString() == "book"
select new XText("BookTitle" + node.ToString());

5. You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server database. The application uses the ADO.NET Entity
Framework to model entities.
The database includes objects based on the exhibit.
The application includes the following code segment. (Line numbers are included for reference only.)
01 using (AdventureWorksEntities context = new AdventureWorksEntities()){
02 ...
03 foreach (SalesOrderHeader order in customer.SalesOrderHeader){
04 Console.WriteLine(String.Format("Order: {0} ",
order.SalesOrderNumber));
05 foreach (SalesOrderDetail item in order.SalesOrderDetail){
06 Console.WriteLine(String.Format("Quantity: {0} ", item.Quantity));
07 Console.WriteLine(String.Format("Product: {0} ",
item.Product.Name));
08 }
09 }
10 }
You want to list all the orders for a specified customer. You need to ensure that the list contains the following fields:
-Order number
-Quantity of products
-Product name
Which code segment should you insert at line 02?

A) context.ContextOptions.LazyLoadingEnabled = true;
Contact customer = (from contact in context.Contact
include("SalesOrderHeader.SalesOrderDetail")
select conatct).FirstOrDefault();
B) Contact customer = (from contact in context.Contact
include("SalesOrderHeader") select conatct).FirstOrDefault();
C) Contact customer = context.Contact.Where("it.ContactID = @customerId", new ObjectParameter ("customerId", customerId)).First();
D) Contact customer = context.Contact.Where("it.ContactID = @customerId", new ObjectParameter ("@customerId", customerId)).First();

Solutions: