Customizable experience from H3C Large-Scale Routing Network Technologies V2.0 test engine

Most IT candidates prefer to choose H3C Large-Scale Routing Network Technologies V2.0 test engine rather than the pdf format dumps. After all, the pdf dumps have some limits for the people who want to study with high efficiency. GB0-381-ENU H3C Large-Scale Routing Network Technologies V2.0 test engine is an exam test simulator with customizable criteria. The questions are occurred randomly which can test your strain capacity. Besides, score comparison and improvement check is available by H3C Large-Scale Routing Network Technologies V2.0 test engine, that is to say, you will get score and after each test, then you can do the next study plan according to your weakness and strengths. Moreover, the H3C Large-Scale Routing Network Technologies V2.0 test engine is very intelligent, allowing you to set the probability of occurrence of the wrong questions. Thus, you can do repetition training for the questions which is easy to be made mistakes. While the interface of the test can be set by yourself, so you can change it as you like, thus your test looks like no longer dull but interesting. In addition, the H3CSE-Routing & Switching H3C Large-Scale Routing Network Technologies V2.0 test engine can be installed at every electronic device without any installation limit. You can install it on your phone, doing the simulate test during your spare time, such as on the subway, waiting for the bus, etc. Finally, I want to declare the safety of the H3C Large-Scale Routing Network Technologies V2.0 test engine. H3C Large-Scale Routing Network Technologies V2.0 test engine is tested and verified malware-free software, which you can rely on to download and installation.

Bearable cost

We have to admit that the H3C Large-Scale Routing Network Technologies V2.0 exam certification is difficult to get, while the exam fees is very expensive. So, some people want to prepare the test just by their own study and with the help of some free resource. They do not want to spend more money on any extra study material. But the exam time is coming, you may not prepare well. Here, I think it is a good choice to pass the exam at the first time with help of the H3C Large-Scale Routing Network Technologies V2.0 actual questions & answer rather than to take the test twice and spend more money, because the money spent on the H3C Large-Scale Routing Network Technologies V2.0 exam dumps must be less than the actual exam fees. Besides, we have the money back guarantee that you will get the full refund if you fail the exam. Actually, you have no risk and no loss. Actually, the price of our H3C H3C Large-Scale Routing Network Technologies V2.0 exam study guide is very reasonable and affordable which you can bear. In addition, we provide one year free update for you after payment. You don't spend extra money for the latest version. What a good thing.

At last, I want to say that our H3CSE-Routing & Switching H3C Large-Scale Routing Network Technologies V2.0 actual test is the best choice for your 100% success.

H3C GB0-381-ENU braindumps Instant Download: Our system will send you the GB0-381-ENU braindumps file you purchase in mailbox in a minute after payment. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

Because of the demand for people with the qualified skills about H3C H3C Large-Scale Routing Network Technologies V2.0 certification and the relatively small supply, H3C Large-Scale Routing Network Technologies V2.0 exam certification becomes the highest-paying certification on the list this year. While, it is a tough certification for passing, so most of IT candidates feel headache and do not know how to do with preparation. In fact, most people are ordinary person and hard workers. The only way for getting more fortune and living a better life is to work hard and grasp every chance as far as possible. Gaining the GB0-381-ENU H3C Large-Scale Routing Network Technologies V2.0 exam certification may be one of their drams, which may make a big difference on their life. As a responsible IT exam provider, our H3C Large-Scale Routing Network Technologies V2.0 exam prep training will solve your problem and bring you illumination.

H3C Large-Scale Routing Network Technologies V2.0 Sample Questions:

1. M In the network shown in the figure, the default next hop RTC of RTA, and the PBR configuration on RTA is as follows:
policy-based-route pbr_a permit node 10
if-match packet-length 64 100
applip-address next-hop 11.0.0.2
if-match packet-length 101 1000
applip-address next-hop 12.0.0.2
policy-based-route pbr_a dennode 20
Assuming the policy is successfully applied, how will the data flow on the RTA be forwarded?

A) Packets with a length of 64~100 bytes will be sent to 11.0.0.2 according to the default route
B) Packets with a packet length of 101~1000 bytes will be routed to 12.0.02 according to the policy
C) Packets with a length of 101~1000 bytes will be sent to 11.0.02 according to the default route
D) Packets with a packet length of 64~100 bytes will be sent to 11.0.0.2 according to policy routing

2. Running the displaipv6 interface vlan-interface1 verbose command on a router displays the following information:
Vlan-interface1 current state: UP
Line protocol current state:UP
IPv6 is enabled, link-local address is FE80::2010:1
No global unicast address configured
Joined group address(es):
FF02::1:FF10:1
FF02::2
FF02::1
MTU is 1500 btes
ND DAD is enabled, number of DAD attempts: 1
ND reachable time is 30000 milliseconds
ND retransmit interval is 1000 milliseconds
ND advertised reachable time is 0 milliseconds
ND advertised retransmit interval is 0 milliseconds
ND router advertisements are sent ever600 seconds
ND router advertisements live for 1800 seconds
Hosts use stateless autoconfig for addresses
From the above information, it can be known that _______________.

A) The transmit function of ND RA is not enabled on the Vlan1 interface
B) The multicast addresses monitored by this interface include FF02::1 , FF02::2 , FF02::1:FF10:1
C) The IPv6 unicast address of the Vlan1 interface is only FE80::2010:1, and the global unicast address is not configured
D) Vlan1 interface is boring and IPv6 protocol status is Up

3. Regarding the LSDB in the OSPF protocol, the following statement is correct is ________.

A) The function of LSDB is to record all the link state description information received by the router
B) There are as many LSDBs as there are areas in the router, and the link state description information received from different areas is stored in separate LSDBs
C) After completing the LSA exchange, the LSDBs of the routers in the same area should be consistent
D) When the route changes, the router should first update its own LSDB according to the update message received, and then update the routing table

4. The administrator wants to configure the OSPF routing priority value to be 100 on the MSR router. Which of the following commands is correct?

A) [Router-ospf-1] ospf prefernce 100
B) [Router] prefernce 100
C) [Router-ospf-1] prefernce 100
D) [Router] ospf prefernce 100

5. In the IS-IS network as shown in the figure, the configuration of the authentication part of each router is as follows:
RTA-Serial2/0]isis authentication-mode md5 h3c
RTB-isis-1]area-authentication-mode md5 h3c
RTC-isis-1]domain-authentication-mode md5 h3c
Then on RTB, the state of RTA neighbor relationship is ______; while RTC______ RTB Level-1 LSP packets

A) up; accept
B) down ; reject
C) down ; accept
D) up ; reject

Solutions: